Der Screwin-Point wie zum Beispiel die 3 D Combospitze 5/16 65 Grain ist die Pfeilspitze für Carbon-und Aluschäfte, aus gehärteten Stahl.

Der Screwin-Point bzw. 3 D Combospitze in der Größe 5/16 ist die Pfeilspitze die bei den meisten Gold Tip Carbon Pfeilschäften passt.

Vorteil: Die 3 D Form minimiert Abpraller bei Randtreffern bei 3D Tieren.

Der Screwin-Point wie zum Beispiel die 3 D Combospitze 5/16 850 Grain ist die Pfeilspitze für Carbon-und Aluschäfte, aus gehärteten Stahl.

Der Screwin-Point bzw. 3 D Combospitze in der Größe 5/16 ist die Pfeilspitze die bei den meisten Gold Tip Carbon Pfeilschäften passt.

Vorteil: Die 3 D Form minimiert Abpraller bei Randtreffern bei 3D Tieren.

Der Screwin-Point wie zum Beispiel die 3 D Combospitze 5/16 100 Grain ist die Pfeilspitze für Carbon-und Aluschäfte, aus gehärteten Stahl.

Der Screwin-Point bzw. 3 D Combospitze in der Größe 5/16 ist die Pfeilspitze die bei den meisten Gold Tip Carbon Pfeilschäften passt.

Vorteil: Die 3 D Form minimiert Abpraller bei Randtreffern bei 3D Tieren.

Der Screwin-Point wie zum Beispiel die 3 D Combospitze 5/16 125 Grain ist die Pfeilspitze für Carbon-und Aluschäfte, aus gehärteten Stahl.

Der Screwin-Point bzw. 3 D Combospitze in der Größe 5/16 ist die Pfeilspitze die bei den meisten Gold Tip Carbon Pfeilschäften passt.

Vorteil: Die 3 D Form minimiert Abpraller bei Randtreffern bei 3D Tieren.

Gold Tip standard Nock 0.246

The standard Goldtip nock for the arrow shafts of carbon that we offer with an inner diameter of 0.246 inches (6.248 mm). This nock is suitable for all arrow shafts with the aforesaid internal diameter. The Gold Tip nock has a weight of 11.5 grain.

Gold Tip manufactures these with minimal tolerance, best quality and accuracy to ensure that this cam is located centrally in the arrow shaft.

Installation instruction for the Gold Tip cam:

• Insert the nock with the thin end into the arrow shaft.
• While sliding the Gold Tip nock in the arrow shaft to rotate the cam until it is fully seated in the arrow shaft.
• By turning of the nock, the index of Gold Tip nock is placed in the required position.

We hope you enjoy archery with arrows by Gold Tip built from archery Beier in high end Quality.

Gold Tip standard Nock 0.246

The standard Goldtip nock for the arrow shafts of carbon that we offer with an inner diameter of 0.246 inches (6.248 mm). This nock is suitable for all arrow shafts with the aforesaid internal diameter. The Gold Tip nock has a weight of 11.5 grain.

Gold Tip manufactures these with minimal tolerance, best quality and accuracy to ensure that this cam is located centrally in the arrow shaft.

Installation instruction for the Gold Tip cam:

• Insert the nock with the thin end into the arrow shaft.
• While sliding the Gold Tip nock in the arrow shaft to rotate the cam until it is fully seated in the arrow shaft.
• By turning of the nock, the index of Gold Tip nock is placed in the required position.

We hope you enjoy archery with arrows by Gold Tip built from archery Beier in high end Quality.

Gold Tip standard Nock 0.246

The standard Goldtip nock for the arrow shafts of carbon that we offer with an inner diameter of 0.246 inches (6.248 mm). This nock is suitable for all arrow shafts with the aforesaid internal diameter. The Gold Tip nock has a weight of 11.5 grain.

Gold Tip manufactures these with minimal tolerance, best quality and accuracy to ensure that this cam is located centrally in the arrow shaft.

Installation instruction for the Gold Tip cam:

• Insert the nock with the thin end into the arrow shaft.
• While sliding the Gold Tip nock in the arrow shaft to rotate the cam until it is fully seated in the arrow shaft.
• By turning of the nock, the index of Gold Tip nock is placed in the required position.

We hope you enjoy archery with arrows by Gold Tip built from archery Beier in high end Quality.

Gold Tip standard Nock 0.246

The standard Goldtip nock for the arrow shafts of carbon that we offer with an inner diameter of 0.246 inches (6.248 mm). This nock is suitable for all arrow shafts with the aforesaid internal diameter. The Gold Tip nock has a weight of 11.5 grain.

Gold Tip manufactures these with minimal tolerance, best quality and accuracy to ensure that this cam is located centrally in the arrow shaft.

Installation instruction for the Gold Tip cam:

• Insert the nock with the thin end into the arrow shaft.
• While sliding the Gold Tip nock in the arrow shaft to rotate the cam until it is fully seated in the arrow shaft.
• By turning of the nock, the index of Gold Tip nock is placed in the required position.

We hope you enjoy archery with arrows by Gold Tip built from archery Beier in high end Quality.

Gold Tip standard Nock 0.246

The standard Goldtip nock for the arrow shafts of carbon that we offer with an inner diameter of 0.246 inches (6.248 mm). This nock is suitable for all arrow shafts with the aforesaid internal diameter. The Gold Tip nock has a weight of 11.5 grain.

Gold Tip manufactures these with minimal tolerance, best quality and accuracy to ensure that this cam is located centrally in the arrow shaft.

Installation instruction for the Gold Tip cam:

• Insert the nock with the thin end into the arrow shaft.
• While sliding the Gold Tip nock in the arrow shaft to rotate the cam until it is fully seated in the arrow shaft.
• By turning of the nock, the index of Gold Tip nock is placed in the required position.

We hope you enjoy archery with arrows by Gold Tip built from archery Beier in high end Quality.

Gold Tip standard Nock 0.246

The standard Goldtip nock for the arrow shafts of carbon that we offer with an inner diameter of 0.246 inches (6.248 mm). This nock is suitable for all arrow shafts with the aforesaid internal diameter. The Gold Tip nock has a weight of 11.5 grain.

Gold Tip manufactures these with minimal tolerance, best quality and accuracy to ensure that this cam is located centrally in the arrow shaft.

Installation instruction for the Gold Tip cam:

• Insert the nock with the thin end into the arrow shaft.
• While sliding the Gold Tip nock in the arrow shaft to rotate the cam until it is fully seated in the arrow shaft.
• By turning of the nock, the index of Gold Tip nock is placed in the required position.

We hope you enjoy archery with arrows by Gold Tip built from archery Beier in high end Quality.

Gold Tip standard Nock 0.246

The standard Goldtip nock for the arrow shafts of carbon that we offer with an inner diameter of 0.246 inches (6.248 mm). This nock is suitable for all arrow shafts with the aforesaid internal diameter. The Gold Tip nock has a weight of 11.5 grain.

Gold Tip manufactures these with minimal tolerance, best quality and accuracy to ensure that this cam is located centrally in the arrow shaft.

Installation instruction for the Gold Tip cam:

• Insert the nock with the thin end into the arrow shaft.
• While sliding the Gold Tip nock in the arrow shaft to rotate the cam until it is fully seated in the arrow shaft.
• By turning of the nock, the index of Gold Tip nock is placed in the required position.

We hope you enjoy archery with arrows by Gold Tip built from archery Beier in high end Quality.

Gold Tip standard Nock 0.246

The standard Goldtip nock for the arrow shafts of carbon that we offer with an inner diameter of 0.246 inches (6.248 mm). This nock is suitable for all arrow shafts with the aforesaid internal diameter. The Gold Tip nock has a weight of 11.5 grain.

Gold Tip manufactures these with minimal tolerance, best quality and accuracy to ensure that this cam is located centrally in the arrow shaft.

Installation instruction for the Gold Tip cam:

• Insert the nock with the thin end into the arrow shaft.
• While sliding the Gold Tip nock in the arrow shaft to rotate the cam until it is fully seated in the arrow shaft.
• By turning of the nock, the index of Gold Tip nock is placed in the required position.

We hope you enjoy archery with arrows by Gold Tip built from archery Beier in high end Quality.

Gold Tip Push in Nocke .246 short

The standard gold tip nock for the carbon arrow shafts we carry with an inner diameter of 0.246 inches (6.248 mm). This nock in the extra short version is suitable for all arrow shafts with the aforementioned inner diameter. The nock weighs 10 grains.

Gold Tip finishes this with minimal tolerance, best quality and accuracy to ensure that this nock is centered in the arrow shaft.

Assembly instructions for the Gold Tip nock:

• Insert the nock with the thinner end into the arrow shaft.
• While sliding the Goldtip nock into the arrow shaft, rotate the nock until it is fully seated in the arrow shaft.
• You can move the index of the Goldtip cam to the desired position by turning the cam.

We hope you enjoy archery with arrows / arrow shafts from Gold Tip.

Gold Tip Push in Nocke .246 short

The standard gold tip nock for the carbon arrow shafts we carry with an inner diameter of 0.246 inches (6.248 mm). This nock in the extra short version is suitable for all arrow shafts with the aforementioned inner diameter. The nock weighs 10 grains.

Gold Tip finishes this with minimal tolerance, best quality and accuracy to ensure that this nock is centered in the arrow shaft.

Assembly instructions for the Gold Tip nock:

• Insert the nock with the thinner end into the arrow shaft.
• While sliding the Goldtip nock into the arrow shaft, rotate the nock until it is fully seated in the arrow shaft.
• You can move the index of the Goldtip cam to the desired position by turning the cam.

We hope you enjoy archery with arrows / arrow shafts from Gold Tip.

Gold Tip Push in Nocke .246 short

The standard gold tip nock for the carbon arrow shafts we carry with an inner diameter of 0.246 inches (6.248 mm). This nock in the extra short version is suitable for all arrow shafts with the aforementioned inner diameter. The nock weighs 10 grains.

Gold Tip finishes this with minimal tolerance, best quality and accuracy to ensure that this nock is centered in the arrow shaft.

Assembly instructions for the Gold Tip nock:

• Insert the nock with the thinner end into the arrow shaft.
• While sliding the Goldtip nock into the arrow shaft, rotate the nock until it is fully seated in the arrow shaft.
• You can move the index of the Goldtip cam to the desired position by turning the cam.

We hope you enjoy archery with arrows / arrow shafts from Gold Tip.

Gold Tip Push in Nocke .246 short

The standard gold tip nock for the carbon arrow shafts we carry with an inner diameter of 0.246 inches (6.248 mm). This nock in the extra short version is suitable for all arrow shafts with the aforementioned inner diameter. The nock weighs 10 grains.

Gold Tip finishes this with minimal tolerance, best quality and accuracy to ensure that this nock is centered in the arrow shaft.

Assembly instructions for the Gold Tip nock:

• Insert the nock with the thinner end into the arrow shaft.
• While sliding the Goldtip nock into the arrow shaft, rotate the nock until it is fully seated in the arrow shaft.
• You can move the index of the Goldtip cam to the desired position by turning the cam.

We hope you enjoy archery with arrows / arrow shafts from Gold Tip.

Gold Tip Push in Nocke .246 short

The standard gold tip nock for the carbon arrow shafts we carry with an inner diameter of 0.246 inches (6.248 mm). This nock in the extra short version is suitable for all arrow shafts with the aforementioned inner diameter. The nock weighs 10 grains.

Gold Tip finishes this with minimal tolerance, best quality and accuracy to ensure that this nock is centered in the arrow shaft.

Assembly instructions for the Gold Tip nock:

• Insert the nock with the thinner end into the arrow shaft.
• While sliding the Goldtip nock into the arrow shaft, rotate the nock until it is fully seated in the arrow shaft.
• You can move the index of the Goldtip cam to the desired position by turning the cam.

We hope you enjoy archery with arrows / arrow shafts from Gold Tip.

Gold Tip Push in Nocke .246 short

The standard gold tip nock for the carbon arrow shafts we carry with an inner diameter of 0.246 inches (6.248 mm). This nock in the extra short version is suitable for all arrow shafts with the aforementioned inner diameter. The nock weighs 10 grains.

Gold Tip finishes this with minimal tolerance, best quality and accuracy to ensure that this nock is centered in the arrow shaft.

Assembly instructions for the Gold Tip nock:

• Insert the nock with the thinner end into the arrow shaft.
• While sliding the Goldtip nock into the arrow shaft, rotate the nock until it is fully seated in the arrow shaft.
• You can move the index of the Goldtip cam to the desired position by turning the cam.

We hope you enjoy archery with arrows / arrow shafts from Gold Tip.

Gold Tip Push in Nocke .246 short

The standard gold tip nock for the carbon arrow shafts we carry with an inner diameter of 0.246 inches (6.248 mm). This nock in the extra short version is suitable for all arrow shafts with the aforementioned inner diameter. The nock weighs 10 grains.

Gold Tip finishes this with minimal tolerance, best quality and accuracy to ensure that this nock is centered in the arrow shaft.

Assembly instructions for the Gold Tip nock:

• Insert the nock with the thinner end into the arrow shaft.
• While sliding the Goldtip nock into the arrow shaft, rotate the nock until it is fully seated in the arrow shaft.
• You can move the index of the Goldtip cam to the desired position by turning the cam.

We hope you enjoy archery with arrows / arrow shafts from Gold Tip.